PVC insulation Power Cable 0.6/1 kV with steel tape armourd (STA)

Type  

  VV22, VLV22, Cu/PVC/STA/PVC, Al/PVC/STA/PVC

Voltage  

  0.6/1 kV

Cores  

  1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E

Range of Nominal cross section  

  1.5 mm2 ～ 630 mm2

Application  

  It applies to electrical power transmission and distribution lines with AC rated voltage

 U0/U up to and including 0.6/1 kV. For outdoor and indoor installation in damp and wet

 locations, laid directly in the ground where excessive mechanical stresses are present

 in sloping and moving terrains and in vertical or inclined laying, as well as in locations susceptible to sliding.

Standard  

I  EC 60502, BS 7870, GB/T12706

Constructions  

Conductor  

Class 1/2 annealed bare copper solid or strands

Insulation  

  PVC

Armour  

  STA (Remark: for single core the armour should be ATA or SSTA)

Sheath  

  PVC or PE

Max. Operating Temperature  

  70 ℃, can be 90 ℃ and 110 ℃ as per requirement

Packing  

  Wooden drum or as per requirement

Production Capacity  

  30 kilometer / day

MOQ  

  1000 meters for small size, 500 meters for big size.

Delivery time  

  10 ～ 15 working days

Remark  

The cable can be of flame retardance, fire resistance, environment friendly 

or other property